Cisco Nexus V9P-3 200Gigabit Ethernet Card - 100GBase-SR4, 40GBase-SR4, 40GBAse-LR4, 100GBase-LR4 - QSFP-DD - Plug-in Card

  • Part: 1488807
  • Model: NXN-V9P3-16X-9GB=
$23,580.70
FREE DELIVERY

Availability

Out of Stock

  • General Information
    • Manufacturer
    • Cisco Systems, Inc
    • Manufacturer Website Address
    • http://www.cisco.com/c/en_au
    • Brand Name
    • Cisco
    • Product Line
    • Nexus
    • Product Type
    • 200Gigabit Ethernet Card

Highest-density network application card

The Cisco Nexus® SmartNIC+ V9P is an FPGA-based network application card, optimized for low latency and high density.

The device packs a powerful 16nm Xilinx Virtex UltraScale Plus (VU9P) FPGAs with 2.5M logic cells, into a compact, half-height, half-length, PCIe 16x form factor.

High-capacity and low-latency memory | An extensive memory hierarchy for complex, memory-intensive applications

The Xilinx VU9P FPGA (Field Programmable Gate Array) features 75Mbit of block RAM and 270Mbit of UltraRAM on chip. The Cisco Nexus SmartNIC+ V9P further incorporates an additional 9GB of DDR4 DRAM on the board for high throughput access. The DRAM is accessible via a 72-bit-wide bus for maximum performance.

The Cisco Nexus V9P-3 FPGA Application SmartNIC model performs at a higher speed reducing the compile time by 40% over the V9P model compile times, that reduces project build time while increasing network uptime. The improved V9P-3 model logic performance and the faster clocked FPGA helps to eliminate any timing issues and can be programmed to reduce network latency to create a better user experience.

High-bandwidth connectivity | Dual QSFP-DD ports provide up to 400Gbps of full duplex connectivity.

The dual QSFP-DD ports offer high-speed 4x40GbE or 2x200GbE connectivity. Using QSFP-DD breakout cables expands the connectivity to 16x10GbE/25GbE4 connections. This high-density connectivity enables a range of high-performance, directly connected network applications, bypassing the need for traditional switching and multiplexing requirements.

Extensive IP library | Cisco is a specialist in low-latency, high-performance FPGA IP cores.

We provide you the same high-speed, low-latency IP blocks used in our market leading products, including:

  • 10GbE PCS/MAC with ultra-low-latency performance
  • Low-latency, high-throughput PCIe DMA engine
  • Timing, signaling, and register interfaces, including I2C
  • Packet field extractor and frame multiplexer (with source code)
  • Asynchronous FIFO and CDC modules (with source code)

Several example designs are also provided to help get design work started and completed quickly.

  • Interfaces/Ports
    • Host Interface
    • PCI Express 3.0 x16
    • Total Number of Ports
    • 2
  • I/O Expansions
    • Expansion Slot Type
    • QSFP-DD
  • Media & Performance
    • Media Type Supported
    • Optical Fiber
    • Data Transfer Rate
    • 25 GB/s
  • Network & Communication
    • Network Technology
    • 100GBase-SR4
    • 40GBase-SR4
    • 40GBAse-LR4
    • 100GBase-LR4
  • Physical Characteristics
    • Form Factor
    • Plug-in Card
    • Height
    • 69 mm
    • Width
    • 168 mm